Видео

Thank you

There's a million 18650 batteries on Amazon, and none tell you the max discharge current. Sigh

Thanks really helped me.

ok so what voltage is max on 8.4v

it can charge to solar power?

Found a broken Hoverboard in the park. Only 4 batteries were damaged. The rest were full charge.

Tnx!!

What about solar trickle charging?

thanks

Blessing

can you help me with the cell order for a 13s4P pack rectangle or triangle pattern

Can I use nimh in smoke detector and how last long?

Well done!

It's frustrating that there's no way to change the discharge voltage Target.

What does it mean if it says low lvoltage

What do i put the amp to if my battery has 5200mah?

Bhai eska kya price hai

When doing a "balance" charge on this charger at 1/3 C (5A for 15000mAh [4S3P] cells), they are as much as 10% different from each other when done, as measured with your Cell Balancer and another cell checker I have. This seems like it could easily damage the battery packs over time and might even be a fire risk. Is this within specifications, or is my TB6B faulty? Thanks.

Thank you for the refresher, short and to the point love it.👍👍❤❤

Storage should be at 50%.

I recently purchased a box of Tenergy Centura batteries and plan to use some in solar lights outside the house. What do you recommend to extend the life of these batteries? Should I remove them in the winter months (New England winters are long cold days, with many days under 32°F)

What If the power sign is on green but the Li-po light is off?

How do I fix it If the red light is blinking slowly?

All good info.

Thanks for the video , i just bought this and i wanna know those port with 2 celles, 4celles can i connect battery directly ? Or do i need the cables that you insert there ? Sorry im new to

i have a doubt, should i fully discharge to 1v my nimh batteries before charging them ? (to increase lifetime?)

my usb wire do not recharge i think.BC is still red light i don;t know why

Hallo can i charge 20 battery from a 24 v 10 ah pack in serie? Thanks

There is a difference of about a whole 0.2 volt between the NiMH and Li-ion. 2x3.7 volts = 7.4 volts. While 6x1.2 volts = 7.2 volts. There's probably something in that clock that oscillates (quartz crystal or such) at a specific known frequency given a specific known voltage. And 7.2 and 7.4 volts probably produce a frequency of oscillation a bit slower than that of a true fully-charged 9v battery that is actually producing 9 actual volts.

i don't why my helicopter charger heats up very quickly and produces a toxic smell

100-240V AC, but 50Hz, 60HZ, 50-60Hz?

Good but, I don't get it how you connected the Tamiya connector from the battery? did you used an adapter ? is not showing in the the video where and how is connected the red and black cables.

how to completely discharge a lithium before taking it to a recycling bin?

Thanks so much, I've been looking at these batteries for the past 2 days and I'm learning more from this video.

Buenas tardes! Adquirí un tenergy tb6ac+80w pero su manual viene en Ingles😢 me podria apoyar con el manual en español por favor.

Is completely discharging Ni-MH batteries before recharging them a good or bad thing?

I can't seem to find LiIo under the program select option. Help anyone?

It says low voltage but I put in the right voltage is my battery blown up I don’t know

Easy explanation that was easy to follow. Great video.

So my sons 8.4 1100mah nimh should max charge at 1.1a and you say to do it at half but the charger doesnt go below 1.0. im assuming just charge it at the 1.0 setting?

I would NOT get the Tenergy 60W panel. It maxes out at 36W and when the panel heats up it gets as low as 10W!

I would NOT get the Tenergy 60W panel. It maxes out at 36W and when the panel heats up it gets as low as 10W!

I would NOT get the Tenergy 60W panel. It maxes out at 36W and when the panel heats up it gets as low as 10W!

I would NOT get the Tenergy 60W panel. It maxes out at 36W and when the panel heats up it gets as low as 10W!

I would NOT get the Tenergy 60W panel. It maxes out at 36W and when the panel heats up it gets as low as 10W!

I would NOT get the Tenergy 60W panel. It maxes out at 36W and when the panel heats up it gets as low as 10W!

I would NOT get the Tenergy 60W panel. It maxes out at 36W and when the panel heats up it gets as low as 10W!

What is the best storage voltage for both Nimh and Nicd, pls?

Excellent vid for how to maximise Nicd and Nimh, thx!

HOW do you charge 1s on these?? It says it will right on the front!